OLD AS I
Senior Member
Currently have a 5HP Campbell Hausfeld 60 gallon compressor, specs are 11.8 CFM @ 40 PSI or 9.4 CFM @ 90 PSI.
Won't keep up with my cabinet sand blaster and want to be doing more sand blasting and painting.
Don't want to go with one bigger compressor due to cost so thinking of another unit about same size, perhaps a little bigger and adding it to the line. Currently air line runs some 30' to end and thinking of adding a new compressor at end of line. Other alternative would be to install 2nd unit close to current one and link them together.
My current pump is a two stage and looking at a V-twin clyd single stage 60 gal unit, 13.4 CFM @40 PSI or 11.5 CFM 90 PSI. Any comments or suggestions would be appreciated
Won't keep up with my cabinet sand blaster and want to be doing more sand blasting and painting.
Don't want to go with one bigger compressor due to cost so thinking of another unit about same size, perhaps a little bigger and adding it to the line. Currently air line runs some 30' to end and thinking of adding a new compressor at end of line. Other alternative would be to install 2nd unit close to current one and link them together.
My current pump is a two stage and looking at a V-twin clyd single stage 60 gal unit, 13.4 CFM @40 PSI or 11.5 CFM 90 PSI. Any comments or suggestions would be appreciated
