D dgkipp Member Jun 27, 2015 #1 Hi Guys, I have a 35 ford and my problem is the bugeye headlights mounted on the fenders are pointed way to high. There is no adjustment in the inside of light which I converted to 12 volt LEDs. How did they adjust these lights back in the day?
Hi Guys, I have a 35 ford and my problem is the bugeye headlights mounted on the fenders are pointed way to high. There is no adjustment in the inside of light which I converted to 12 volt LEDs. How did they adjust these lights back in the day?
S scooder Well-known member Jun 27, 2015 #2 Same way you adjust them now. You move the whole headlight on a 35 don't ya? Martin.
chap52 Well-known member Jun 27, 2015 #3 I believe you just loosen the bolt holding the housing to the fender and re aim it the same as it was done on the '31 Model A's.
I believe you just loosen the bolt holding the housing to the fender and re aim it the same as it was done on the '31 Model A's.
D dgkipp Member Jun 27, 2015 #4 Thanks for the reply, the 35 has a permanent mount headlight bracket bolted at the bottom to the fender.
Thanks for the reply, the 35 has a permanent mount headlight bracket bolted at the bottom to the fender.
Lawson Cox Well-known member Jun 27, 2015 #5 Loosen that big nut that holds the headlight then re-position the headlight and re-tighten the big nut, Even a cave man can do it. lol
Loosen that big nut that holds the headlight then re-position the headlight and re-tighten the big nut, Even a cave man can do it. lol
