Adapter for Model B Carbs ?

Ron in Quincy

Ron in Quincy

Well-known member
Some time ago someone posted that a Dealer had a adapter available that permits the gas line connection to face out like the Zenith and Holley Carbs.

Who is the Dealer that has these Adapters ?

Thanks, Ron

The reason I asked the Question, I have a B Top that has only threads and no seat; I was told that Zenith actually produced this Top as the 32 B had no gas filter between the gas tank and the carb and it was designed to use a 31 Side Bowl as the filter; I actually mounted a 31 Side Bowl on this top and the threads were correct and the inlet of the Side Bowl faced out. I do not plan on using this B Carb, just want to finish it as it will be For Sale and I do not want to run up the price by adding a 31 Side Bowl.

Has anyone else run into a B top like this ?
 
Last edited:
Renner's Corner (Dave Renner) RC-9510-XC $14.00 (Just the gas fittings)
10320 E. Austin Road
Manchester, Michigan
734-428-8424

Snyder's A-9510-K $31.00 (Bolts to align the choke control, gasket and the gas line fittings)
 
Your local hardware store had the same angle fitting. You can take two mounting bolts and grind off some of the threads to tilt the carb a little as well.

 

Hi Ron,


JUST GO TO ANY GOOD PARTS STORE & GET THE CORRECT FITTING.. i THINK IT'S 1/8TH PIPE, 90 DEGREE TO 5/16 COMPRESSION.


I USED THIS ON MY B CARB & THE FUEL LINE WILL WORK ON BOTH A & B CARB'S




GREG OUT WEST AFTER YEAR & HALF GONE.
 
You must log in or register to reply here.
Back
Top