Jim Kellett
Member
- City
- Baldwin
- State
- Maryland
- Price
- $325
30/31 AA radiator. I had this radiator professionally flushed and rodded a few years ago. Didn't realize it was an AA radiator until I attempted to put the A shell over it and found out that it didn't fit. The 1/2" spacing from the front face to the fill neck makes it an AA radiator. When it was rodded the mechanic closed off 10 tubes. Said that the remaining tubes were fine and the radiator was in good condition. The fins are in great shape with just a few small areas,about the size of a half dollar, where the fins on the
back side could use some straightening. No actual damage just slightly bent fins. In my opinion this radiator can be used on a show vehicle once the fins mentioned are straightened.
The top tank is 4 1/4" front to back and core is 2 1/4" thick. I think this is the 3 row core not the 4 row. Have several pictures. If interested email me and I will forward them to you. Price is $325/B.O.. Can ship at buyers expense or you can pick up at Hershey. No International shipments.
back side could use some straightening. No actual damage just slightly bent fins. In my opinion this radiator can be used on a show vehicle once the fins mentioned are straightened.
The top tank is 4 1/4" front to back and core is 2 1/4" thick. I think this is the 3 row core not the 4 row. Have several pictures. If interested email me and I will forward them to you. Price is $325/B.O.. Can ship at buyers expense or you can pick up at Hershey. No International shipments.
Attachments
Last edited: