A Condenser on a B distributor

D

DBSHELTON

Senior Member
Did I see where someone modified an A condenser to use on a B distributor? I can't seem to locate it now. I think they drilled another hole in the bracket to mount and made up a pigtail wire to hook it up.
 
That's what I did on my "B" distributor. I slip the "A" condenser through the "B" distributor condenser mounting hole. Eyeball engineer where the hole should be drilled on the "A" condenser mounting tab. Once I drill and mount the "A" condenser I also bend the consenser tab over to conform to the "B" distributor. And yes on the pigtail. ;)


Bob-A:D
 
DBSHELTON said:
I guess you have been running this a while?
Click to expand...


Well, not really....:eek: It's been very rainy here in central Florida for a while.
Plus, I've got a couple of Harleys to keep running, an acre of grass to mow, there is a pandemic, etc., etc.:rolleyes:


The ..'Barner who posted the original message on running the "A" condenser with the "B" distributor, I can't remember his name, is a very knowledgeable guy. So I see no reason why it should not work.:cool: Heck! I start the car up periodically and it runs fine......when I get the timing right:o I am a constant fidget'r who will not leave well enough a lone and usually cause more bad then good.:p


Bob-A:D
 
You may be thinking of my post. The one thing I failed to mention is that I believe there is a short wire used for something else that will serve to connect the condenser to the distributor, Be sure to get a quality condenser like the one from Brattons.

Charlie Stephens
 

Attachments

  • IMG_8204.jpg
    IMG_8204.jpg
    52 KB · Views: 46
  • w0iQY7D2TlKHvQNg0E6F5A_thumb_6a86.jpg
    w0iQY7D2TlKHvQNg0E6F5A_thumb_6a86.jpg
    83 KB · Views: 41
If you contact Gotham Auto Parts in New York they sell a high quality “B” condenser. Mine has worked for years. Dave
 
The condenser can be connected to the switch side of the coil , (red wire) . A modern condenser is easy to set up and connect because it already has a pig tail . In such cases , no condenser will be used in the distributor . The condenser should last longer when connected in this manner because it will run cooler , it will also be much easier to remove and replace . In such cases , a modern condenser is much easier to locate . I have used this setup for many years on my september 29 .
 
You must log in or register to reply here.
Back
Top