9425 B intake What size carb studs?

[mikhett]

I boughtt a 9425 B inake off Evil Pay,itt didnt come with the 4 carb studs.how can Ii tell what size i need? TThanks

 

[scrapiron]

HUH,,,,should be 5/16,,,1/2 wrench size normally

 

[JeffB2]

Add this to it: http://www.jegs.com/i/Trans-Dapt/969/2584/10002/-1?parentProductId=1068337

 

[mikhett]

Jeff If I got that same adapter but used the studs on my 62 galaxie xl!

 

[JeffB2]

The heat insulator shown would have the correct studs with it,what Carb were you going to use?

 

[mikhett]

autolite 4100 went in the gal.im putting in a Holley 600cfm elec choke carb on the 56 292 victoria!

 

[paul2748]

A 600 CFM carb is really too big for a stock 292. Around a 500 CFM would be better. I have had good luck with Edelbrocks right out of the box.

 

[JeffB2]

If you haven't bought the Holley consider this:http://www.summitracing.com/parts/sum-m08600vs Has the good qualities of the 4100 with upgrades and uses Holley parts to tune,in most cases a 2-3 more MPG than the Holley or Edelbrock.