- City
- Huntsville
- State
- AL
- Price
- $150.
9" Ford rear axle housing, axles, backing plates, brake shoe mounting hardware, and drums for what I believe is a 67-69 Mustang, Comet, Fairlane, etc. The axle flange-to-flange measurement is 59 1/4" and the axle housing tubes transition from 3" at the center section to 2 3/4" near the end flanges. The spring saddles have been removed from the housing as I was going to install a 4 link, then had to change to a narrower axle. I'll take $150 for the above.
I also have a pumpkin for a 9" Ford, which I will sell with, or separate for $100. It is rough, meaning it has been open and exposed to the elements for a while. Surface rust on the gears and it has trash in it as well. Will definitely need to be rebuilt.
Due to the weight of these items, only local pickup is practical. I'm in Huntsville, Alabama. Email with requests for further info/photos.
I also have a pumpkin for a 9" Ford, which I will sell with, or separate for $100. It is rough, meaning it has been open and exposed to the elements for a while. Surface rust on the gears and it has trash in it as well. Will definitely need to be rebuilt.
Due to the weight of these items, only local pickup is practical. I'm in Huntsville, Alabama. Email with requests for further info/photos.