79 granada valve lifters

[Ford coupe]

anyone know where i can purchase a set of 12 oem lifters for a 79 granada with 4.1 engine as the aftermarket ones are to noisy..

 

[darrell]

anyone will have lifters for a 250.they are the same as the fe engines like 390.rockauto and many others.

 

[KULTULZ]

The FORD PN is C8AZ 6500-A.

EvilBay

 

[rotorwrench]

The Hylift A-2083 should be made in the USA. The Topline Hylift stuff is addvertized to be manufactured here in the US but it's hard to tell if it's true by looking at any given auto part. A person has to check the clearance and make sure it is within the range. If it close to a limit (especially max limit) then a person can change the push rod for a better clearance as long as the push rods aren't too much longer in the next available length.

 

[KULTULZ]

A person has to check the clearance and make sure it is within the range. If it close to a limit (especially max limit) then a person can change the push rod for a better clearance as long as the push rods aren't too much longer in the next available length.

No use rotor as he didn't believe this the first go-around -

https://www.fordbarn.com/forum/showthread.php?t=305243

EDIT -

There were three different push-rod lengths released for service/adjust-ability -

1977/ 250CI

STD -9.345" L
.020" U/S
.040" O/S

LIFTER is 1.83" L