66 Ranchero

[35 rancho]

Newbe in this dept. Just got a 66 Ranchero , From the original owner. Has bucket seats , 289, automatic, 3- 2 barrels ,power stearing, and air condition. Its been stored out side in a field, where a big bolder slid down hitting the car. I will be looking for a left rear 1/4 panel. drug it home Sat. pulled out most of the rat nest. Just wondering if anyone can direct me to parts for this thing, and is this a rare setup? Everything seems to be factory installed. Thanks for any pointers. Dave

 

[JeffB2]

This is a source for the 1/4 panel: http://www.dvap.com/salvage/1966-ford-ranchero-66fo3420d/

 

[toby]

www.ranchero.us

Macs Anitque Auto Parts

http://www.macsautoparts.com​

Autokrafters

http://www.autokrafters.com​

Dearborn Classics

http://www.dearbornclassics.com​

Marti Auto Works

http://www.martiauto.com​

 

[paul2748]

3 2 bbls were not a factory set up.

 

[34pickup]

The 3x2 setup only came stock on the big block FE engines, 390 and 406. If you have a setup on a 289 then its probably one of the Cobra aftermarket/dealer sold units.

 

[Ford blue blood]

67 Fairlane quarter will fit. My 66 has a 67 quarter on it.

 

[1967gt]

No it wont...

 

[frank long island]

depending on your damage you maybe able to get a skin and keep the jamb and other parts to attach it also try panel adhesive when replacing it saves a lot of time on cleanup google rust repair panels for your part

 

[Ford blue blood]

No it wont...

Yes it will. This picture is the car after a drunk hit it. Not me in the pic, that right rear quarter came off a 67 Fairlane, I know because I cut it off the Fairlane.

OK, won't upload the pic, don't say why, just that it failed.

Found a couple of pics....most of the build pics went with the car when it was sold.