64 falcon

[whatdoyouwant]

Hi guys, I have a 64 Falcon with the Ford O Matic (not cruise 0 matic) ******. The o ring on the kick down lever is leaking. Can I drop the pan and replace the O Ring with the ****** in the car? Wish it had a seal instead of o ring.

thanks al

 

[whatdoyouwant]

OK I pulled the pan, and there is no way to replace the o ring without dropping the entire valve body out of the case. You cannot slide the shaft out with the valve stack in the case.

O well that is how my luck goes.

 

[KULTULZ]

You have the F/M/2, correct?

Dropping the valve body is not all that difficult or take it to a well established TRANS SHOP.

See if this will help - https://cogpro.com/chapters/K-TwoSpeedFordomatic/index.htm

 

[whatdoyouwant]

No, this is not the ****** I have. These pictures show a seal on the shaft, and I have an o ring.

 

[KULTULZ]

No, this is not the ****** I have. These pictures show a seal on the shaft, and I have an o ring.

... hmmpf ...

The heading reads F/M/2 but then describes a TORQUE-FLITE or Section M - Three Speed Hydramatic/M - 3 spd

My mistake for not proof reading ...

You can buy on CD the SHOP MANUAL, the MASTER PARTS CATALOG and usually the TRANS SHOP MANUAL. Nice to have ...

 

[whatdoyouwant]

OK I will see what I can find


thanks al

 

[KULTULZ]

Guess I should have given you a lead ...

This is what you are looking for ...

The CD for the FALCON does not show including the TRANS WSM -

https://www.detroitironis.com/

You should be able to find a paper copy on FleaBay.

If not, get back.

 

[KULTULZ]

You have the F/M/2, correct?

Dropping the valve body is not all that difficult or take it to a well established TRANS SHOP.

See if this will help - https://cogpro.com/chapters/K-TwoSpeedFordomatic/index.htm

I don't understand their webpage. I thought if I hit the PayPal ICON, it would give an option, but didn't ...

Guess many of these older sites are not kept up.