6 volt positive ground SW gauges

J

jkflathead

Well-known member
What is a good source for 6 volt, positive ground, Stewart Warner gauges? I ordered an electric oil pressure and temp gauge from Speedway and they sent me 12 volt negative ground gauges. Thanks.
 
I bought mechanical SW gauges from Summit for my '46, 59AB Coupe, before I figured out how to repair the stock dash gauges.
The P/N's SWW-82208 Oil pressure
SWW-82210-36 Water temp
SWW-82175 Vacuum gauge
SWW-82553-F Tube kit 6ft
SWW-811653-F Panel 3 hole 2-1/16

The reason I decided to install the vacuum gauge, is vacuum is a great indicator when troubleshooting an engine problem. I connected the oil tube below the pressure sender (see pic) and the temp sensor went in the left cylinder head in front of the rad hose spigot.
 

Attachments

  • Mech Gauges at Idle.jpg
    Mech Gauges at Idle.jpg
    42.8 KB · Views: 113
  • Oil Press Sender.jpg
    Oil Press Sender.jpg
    43.5 KB · Views: 109
51woodie said:
I bought mechanical SW gauges from Summit for my '46, 59AB Coupe, before I figured out how to repair the stock dash gauges.
The P/N's SWW-82208 Oil pressure
SWW-82210-36 Water temp
SWW-82175 Vacuum gauge
SWW-82553-F Tube kit 6ft
SWW-811653-F Panel 3 hole 2-1/16

The reason I decided to install the vacuum gauge, is vacuum is a great indicator when troubleshooting an engine problem. I connected the oil tube below the pressure sender (see pic) and the temp sensor went in the left cylinder head in front of the rad hose spigot.
Click to expand...
541343


541344
 
I don't think gages care about polarity, and they probably don't care about being on 6V either since they just compare resistance between the internal resistor and the external one in the sender which will always be a ratio of the voltage.
 
Does anybody make an electric, 6 volt, positive ground oil pressure gauge and and temp gauge? I am beginning to think that they are all mechanical. Or has "chevy43" got it right that polarity and voltage don't matter? I called Speedway and spoke with the "flat head" tech., he really didn't know much. I'd love to find electric. Thanks.
 
jkflathead said:
Does anybody make an electric, 6 volt, positive ground oil pressure gauge and and temp gauge? I am beginning to think that they are all mechanical. Or has "chevy43" got it right that polarity and voltage don't matter? I called Speedway and spoke with the "flat head" tech., he really didn't know much. I'd love to find electric. Thanks.
Click to expand...

Well, since all electrical gauges I have seen have two connecting posts, I would say polarity doesn't matter; if they don't work, just switch the wires. As to voltage, I think a quick calculation with Ohm's Law, and a proper resistor may be all that is required.
 
You must log in or register to reply here.
Back
Top