59AB early cam ideas

mustangbrandon

mustangbrandon

Member
Barn inhabitants:

First: Need to find the "cam button" so I can run a helmet distributor. It currently has crab. I do have the right timing cover, but need the spacer. I cannot locate it anywhere online.

Second: Need a cam recommendation. Has NOS offy heads and intake. Looking for a "mild" option, something available new. There's a ton of cool old grinds but I don't think I'd be able to find one. Car is a stock 41 Convertible, just looking for a little extra to take advantage of the parts that came with it. While I love the L100 etc, I need something between that and stock. Any of the Schneider cams decent?

Thanks!!

Brandon
 
Brandon to switch from helmet to crab you need a distributor adapter/ spacer. The early cam is longer.
 
To switch to an aftermarket cam in a relatively stock engine is quite expensive, and any cam you choose will reduce low end torque. Your best bet would be to increase compression. Any cylinder head you choose, stock or aftermarket can be angle milled over the valves to leave .050" clearance. Usually around .070/.080, now this stock engine will have around 8:1 Cr, bored to 5/16 9:1 all for less money than a cam assy. Using a modified SBC distributor and 2GC carb. Unfortunately, the engine will look like it's perfectly stock. The upside, more power where you need it and fantastic gas mileage/
Gramps
 
KiWinUS said:
That button is to convert a short nose crab style cam to a helmet distributor. The OP wants to do the opposite.
Click to expand...

I must be missing something he wants to run a helmet style currently has a crab style. That’s what I read in the first post?
My 38 has a 59ab and button under the helmet.
 
You must log in or register to reply here.
Back
Top