So, my next project is brakes. Master cylinder is missing. Just stock brakes, and the master cylinder mounts on the frame. I know there should be a distribution block somewhere to direct the fluid to front and rear brakes. I don't see any on the frame. Would it be mounted on the master cylinder? Shop manual is unclear. Thanks
55 F100 Master Cylinder
- Thread starter tommyleea
- Start date
Thanks..Don't know how I missed that. It appears all the lines go into a fitting on the master cylinder itself.
KULTULZ
Well-known member
The Ill is from a FORD PARTS BOOK.
mobileparts
Senior Member
If you would like a U.S.A. manufactured NEW Master Cylinder ( and Wheel Cylinders, Brake Shoes, Brake Hoses, etc., etc.),
Call me -- Craig -- 516 - 485 - 1935.... West Hempstead, Long Island, New York....
Call me -- Craig -- 516 - 485 - 1935.... West Hempstead, Long Island, New York....
mobileparts
Senior Member
You aren't going to fix it, after all??????
Fighting kingpins right now. Thanks for the info...
mobileparts
Senior Member
I have U.S.A. made King Pins and Pin Kits also.....
You have the phone number -- no fighting required.....
You have the phone number -- no fighting required.....
That is the part I need. Distribution block that bolts to the master cylinder. Would anyone have one laying around? Maybe converted their brakes from the single master cylinder, and still has this part? I have one on order, but it is backordered, and it doesn't look promising at this point. Any help would be appreciated.
KULTULZ
Well-known member
8C 2076 - GOOGLE that PN and you will find it.
Attachments
Thanks...I did find it, and it is on order, but it is backordered.
KULTULZ
Well-known member
Last edited:
poolplayer1
Senior Member
Sorry to get into this matter but I have a question for Kultulz. Do you by any chance have a parts breakdown and maybe part #'s of the emergency brake ? I am missing some parts so would like to identify them so i can order and install in my 55.
It is a 1955 ford Ranch Wagon. I saw the diagram above but my car has a different design that this one. Thank you kindly.
It is a 1955 ford Ranch Wagon. I saw the diagram above but my car has a different design that this one. Thank you kindly.
Thanks KULTULZ..I did look on Ebay, but the one I looked at was out of stock. Your number worked, and it is on order. Cheers!
KULTULZ
Well-known member
Here you go. The ILL is broken into two parts as my scanner is on the fritz.
Give me the PN's you need from the Ill and I will post the complete PN.
