53 Flathead engine cradle

T

tommyleea

Senior Member
Trying to find an engine cradle so I can remove my engine from the stand, and work on clutch, bellhousing etc. I have found Stumpy's fab site, but not sure of the ordering procedure. I found the cradle, but can't seem to figure out how to order it. Any help? Thanks..
 
tommyleea said:
Trying to find an engine cradle so I can remove my engine from the stand, and work on clutch, bellhousing etc. I have found Stumpy's fab site, but not sure of the ordering procedure. I found the cradle, but can't seem to figure out how to order it. Any help? Thanks..
Click to expand...

Go to the 'Contact' page in the fab site and communicate to him what your needs are.
 
EMAIL: stumpysfabworks@hotmail.com

https://www.stumpysfabworks.com/

If you plan on putting the engine on an engine stand, DON'T use the bell housing, mount the engine at the exhaust manifold area!!!!!

Picture
FORD FLATHEAD 59AB/8BA Cradle $46.00

Ford Flathead 59AB/8BA, 85 - 100 HP V8 Cradle
Comes with mounting hardware.
Will support engine or engine transmission together .....$46.00



HD-P Caster Kit adds ....................$40.00
HD-PB (brake) Caster Kit adds $46.00

Picture
FFESA - S85 $67.00

Ford Flathead 85-100HP 59AB/8BA
Engine Stand Adapter
​​*Fits standard eng. stand with 2-3/8"opening. Other sizes available,
​ email me with your size needs if different. Not responsible if
​ not checked.*
Comes with mounting hardware ...................$67.00
 
Last edited:
Capn John said:
EMAIL: stumpysfabworks@hotmail.com

https://www.stumpysfabworks.com/

If you plan on putting the engine on an engine stand, DON'T use the bell housing, mount the engine at the exhaust manifold area!!!!!

Picture
FORD FLATHEAD 59AB/8BA Cradle $46.00

Ford Flathead 59AB/8BA, 85 - 100 HP V8 Cradle
Comes with mounting hardware.
Will support engine or engine transmission together .....$46.00



HD-P Caster Kit adds ....................$40.00
HD-PB (brake) Caster Kit adds $46.00

Picture
FFESA - S85 $67.00

Ford Flathead 85-100HP 59AB/8BA
Engine Stand Adapter
​​*Fits standard eng. stand with 2-3/8"opening. Other sizes available,
​ email me with your size needs if different. Not responsible if
​ not checked.*
Comes with mounting hardware ...................$67.00
Click to expand...


I have 2 engine stands and both use the water pumps and the bell for mounting. Please explain your concern
 
oldford2 said:

I have 2 engine stands and both use the water pumps and the bell for mounting. Please explain your concern
Click to expand...

The concern is with the 59a blocks, not the 8ba blocks. I'm sure you are aware of that, but some others might not be.
 
You must log in or register to reply here.
Back
Top