52 merc throttle bracket

[apba12m]

I need to know if you have seen re pops or where I can get another throttle bracket that mounts on the fuel pmp bolt and intake bolt just below it pass side of the motor? Thanks Lou.

 

[RalphG]

Is yours worn out? Or missing? If its just wear in the holes a good machine shop could repair it.

 

[apba12m]

need another for 2nd car..

 

[rotorwrench]

No Repops but I imagine you can find a good used or NOS one. There are still a few old timey salvage yards out there that could have an old 4 or 2-door 52/53 Merc with the right transmission type. Is this for a standard trans or Merc-O-Matic?

 

[apba12m]

Standard shift bracket is for holding the throttle rod that runs across the firewall to pass side of motor.

 

[rotorwrench]

Here's the whole shebang but I don't know if it's worth what he's asking. http://www.ebay.com/itm/1952-53-Mer...m1e6edd9f45:m:mjmt89jPhTXTUYjYej5qYOQ&vxp=mtr

The part you need is the MA-9833-A bracket and fits both 52 & 53.

 

[38coop]

Check with Chris at Shoebox Central. (405-259-9222).