52 ford customline clutch ball arm

5

52fordv8

Member
does anyone have a pic of how this goes on the side of the flathead block they removed the flathead out his car and just noticed that i dont see how this hooks up i see no threaded holes inside the block like u see in a late model ford or chevy block .
 

Attachments

  • 1004674_10153163335655366_159680969_n.jpg
    1004674_10153163335655366_159680969_n.jpg
    38 KB · Views: 14
There is a separate bracket that bolts on with the bell housing. I think it is the same bracket for both the 6 and V8 engines, but I could be wrong.
 
oh . i knew i was going to hear something like that as i looked at the side of the block and see no way anything goes there . maybe someone who has a 52 ford car will have a pic of this set up i hope . :)
 
It is the same setup as 53. You can see where the bracket would bolt up on this picture of my 6 cylinder. I can get you a picture in the next couple of days if you still need it.


I also have this picture of a 53 V8, but it is hard to see:
 
ok if u get time see if u can get me a closer pic . of it what ever the peice is im going to have to post that im needing one for this car . i can tell now by looking at the car pics i have of mine that it caint go to the block so ur right the bell housing is right there at it
 
You must log in or register to reply here.
Back
Top