51 MERC-CT Well-known member Feb 23, 2022 #21 Why not upgrade to a later model? Installed this on mine over 20 years ago from NAPA or others. Helps to give a finer adjustment. Attachments spindle nut.JPG 67.7 KB · Views: 37 Last edited: Feb 23, 2022
Why not upgrade to a later model? Installed this on mine over 20 years ago from NAPA or others. Helps to give a finer adjustment.
rich b Well-known member Feb 24, 2022 #23 cas3 said: A brief search shows me an old tall one, 1 1/8 wrench, and the short one, .590 tall, takes a 1 1/4 wrench, but both are 3/4 16 thread. 3/4 20 is odd, not listed on my tap and die chart on the wall. could be the difference? Click to expand... 3/4-16 is right; not sure where the 20 came from; and I know better.
cas3 said: A brief search shows me an old tall one, 1 1/8 wrench, and the short one, .590 tall, takes a 1 1/4 wrench, but both are 3/4 16 thread. 3/4 20 is odd, not listed on my tap and die chart on the wall. could be the difference? Click to expand... 3/4-16 is right; not sure where the 20 came from; and I know better.
