45 Ford Choke and Throttle linkage help

[will.rynerson]

Hi guys,

I’m attempting to put my choke and throttle (C/T) back to the carburetor. But, I can’t seem to remember how to connect the (C/T) arm and knobs back thru the dash, thru the fire wall. I have 4 books and none explained it, parts sites don’t pull up (C/T) linkage, I found a (C/T) cable at Joe’s, I just don’t know if I need linkage or a cable and some kind of connectors and none have pictures. Ugh… and I’m a visual kind of guy!

I found the linkage picture I took early on.

 

[Zeke3]

Based on the photo you added, the linkage shown would attach directly to the carburetor choke and throttle lever balls.

 

[will.rynerson]

Thanks, I’m looking forward the linkage one piece for the choke and the throttle. Joe’s might have a solution for me so I’m gonna give that a shot.

 

[Mart]

You have everything there that you need. Foot pedal is the lever on the firewall which needs lifting up so the rod is near horizontal. Choke is on the right (of the vehicle, left in photo) and hand throttle is on vehicle left.
If you had the carb in place (a 94) it should be obvious where the rods attach.
Mart.