41 Oil filter fitting

[Dick C]

Anyone know where I can get the 1/8 male&1/8 female brass fitting with the tiny hole in it that screws into the side of the oil filter? No one has it locally or the dealers.

 

[G.M.]

try www.royalbrassandcopper.com G.M.

 

[Dick C]

Thanks G.M. Will call Skip in the morning. royal brass web sight is down.

 

[richard crow]

use a regulator fiting fill the hole with soder & than drill it to size.not sure but about .050 some one on the site will chime in with the size hole.

 

[Kube]

use a regulator fiting fill the hole with soder & than drill it to size.not sure but about .050 some one on the site will chime in with the size hole.

Original specification was .058" - .062".
Richard, that hole as you say, is quite important.

 

[Dick C]

Did do what Richard said. Filled with soder and drilled a .055" hole in it and used a weldng tip file to clean it up.