41 ford patch panal

oldskool

Well-known member
need r/f lower fender patch panel anyone making them?im talking about the rear part that runs from cowl to wheel opening need 3inch or higher 41-48 should be the same
 
Last edited:
Is the panel you need for the actual fender or the lower cowl under the front fender? If it is the latter those pieces are available from EMS.
Matt
 
the fender itself mine rusted aand full of bondo i bought new drake fender braces and where they attach to fender is missing , by the way bob drakes fender braces fit very well,and on sale also...
 
I couldn't find fender lip replacements and have patched mine for now. The lower cowl piece is available, the edge isn't as sharp as original but no one will notice once it's on the car
 
I believe the 41 fender has a cutout that matches up to the running boards. The 42-48 should be the same.

The man of few words :) is correct. 41 is all by itself. I had to patch mine also. There are a few NOS lower fenders floating around out there. BUY one, you will never have to fix it again.
I did a national craigs list search after fixing mine and found a couple of them.
 
Hi,
just a word of advise.
The rear 41 ford fenders arn,t all the same. The station wagon's are just a little longer. Also the s.steel fender trim. Also the station wagon,s are somewhat flatter so be careful when you purchase rear fenders.

Al
 
Back
Top