40 Ford Heater

[40 FourDrDlx]

Here's a picture. I have copies of the template if anyone needs one.

And thanks to "rustynutz" for sending me a copy 2 years ago when I was putting my heater in!

 

[HC&ME]

Hot Water!

If anyone has pics please let me know !

gmail. msmith61747@gmail.com

 

[quickchange34]

Another thanks to rustynutz for helping me.

 

[rustynutz]

Thank You Guys! I'm glad I could help. I don't post much, but I'm here everyday absorbing the wealth of knowledge here.

 

[LOU WELLS]

The 39/40 heaters look the same but the 39 is special in that one door does not open all of the way because of the floor shifter.

 

[scooder]

Thanks! That is the place where my 46 heater is. My 40 does not have a heater but the previous owner put the fuse box where the heater belongs. What I have for the Fordy is a Zephyr model Tropic Aire. Is there templates to be had for that heater. And does anyone have info of the Tropic Aire being used in a 40? MY 46 circulates through the driver side bottom radiator hose and the passenger side head. Is a stock 40 Ford set-up like this?

I'm pretty sure the heaters were normally plumbed to one side, passenger side bottom hose or pump, passenger side head.
I do like the idea of how yours flows, would maybe help normalize the cooling differences from each side of the cooling system that most report.?
Martin.

 

[19Fordy]

Hot Water!

If anyone has pics please let me know !

gmail. msmith61747@gmail.com

Here's an OEM 40 Hot Water Heater.
I painted it Mandarin Maroon, like the dash, instead of silver.
Here's the correct OEM painted heater.
http://www.ebay.com/itm/1940-FORD-MERCURY-HEATER-RED-STRIPES-EASY-TO-APPLY-/321939873159