40 ford headlight alignment screws

[tubman]

The 1940 adjustment screws are 10-32 X 1-1/4"L as measured from under the second head, made of steel with a slotted pan head. Would be easy to solder a washer under the head with a gap of 1/16" between the two heads.

This is exactly what I was thinking after inspecting the larger screws I removed from the '50 buckets.

 

[1oldtimer]

Post a picture as I can’t remember exactly what they look like where it screws in. Several different options if you’re willing to adapt or modify. If it has an insert you can replace it to run the more common larger bolt or cut and tig weld a regular screw to the head of an adjuster, worst case you buy some junk ones for the adjusters.