40 Ford headlight adjustment screws

gmc1941

gmc1941

Senior Member
Does anybody have any idea where to get headlight adjustment screws and the brass stationary nut from, I've called everybody. Anybody have has any? Nobody has them in stock. These are for the the seal beam headlights.
 
Last edited:
Looking for some headlight adjustment screws and the brass nut. Nobody has them. Anybody willing to part with them? These are for seal beam headlights.
 
NOBODY HAS THEM IN STOCK! And no idea when the item is going to be re-stocked. Thanks for the help, just finished making a fair reproduction one, as I said fair but itworks.
 
Hi GMC,
I have a couple of these adjustment screws that I just removed out of an old 40 headlight bucket. I thought I had enough to restore 2 original buckets, but had only two. They are not beautiful but one was pretty good and the other was... remove with vise grips and carefully rebuild with JB Weld. The threads appear to be okay but I just wire brushed them, I didn't have a thread chaser of the correct size. The brass nuts are both fine as you might suspect, but I had to remove the side adjuster sheet metal bracket to remove that one. I will have to cut a new slot in one of the machine screws and they should dry for a good 24 hours first (I used the JB Weld Marine). So... send me your address and bring over a wheel barrow load of greenbacks and I'll send them to you (just kidding, $2 for shipping ought to do it). Do you need the little bracket that I had to remove? Best wishes, Toby Lampert e-mail jen.toby@yahoo.com or phone 802-869-2688
 
You must log in or register to reply here.
Back
Top