F fordman Senior Member Jul 8, 2016 #1 just discovered no volts to light switch ; replaced fuse to light switch . no lights head, tail , or parking, no smoke engine starts and runs. what do you suggest I should check ? thanks fordman
just discovered no volts to light switch ; replaced fuse to light switch . no lights head, tail , or parking, no smoke engine starts and runs. what do you suggest I should check ? thanks fordman
JSeery Member Emeritus Jul 8, 2016 #6 Ken is correct, the 40 should have a circuit breaker not a fuse. It may have been modified somewhere along the way. If it blew a fuse once you may need to determine why.
Ken is correct, the 40 should have a circuit breaker not a fuse. It may have been modified somewhere along the way. If it blew a fuse once you may need to determine why.
F fordman Senior Member Jul 8, 2016 #7 could find original light switch that looked original so I replaced with switch that had a built-in fuse that I installed under dash . fordman, "kinda"
could find original light switch that looked original so I replaced with switch that had a built-in fuse that I installed under dash . fordman, "kinda"
JSeery Member Emeritus Jul 8, 2016 #8 Then have you checked the CB to see if you have power out to the lighting switch?
