4 questions

Neil Mylar LakewoodCA

Neil Mylar LakewoodCA

Well-known member
1. I bought the cork & metal gasket for the fuel guage. What order do the large washers go?
2. What size d-nut is used for the door straps on my 29tudor?
3. Do any parts house sell a horn cover for the gmi horn?
4.What type gas gauge float is best to use?
 
#4. brass tank floats made by Reenlee H. Kotas San Diego. Sells for about $5,
858-278-8178.

Tom Endy
 
Answer to number 1,

Gas Gauge Exploded drawing

Answer to Number 2, (I think) From vendors catalog,

"1928 - '29 Closed Cars only. This is the set of screws needed to attach your door check strap. 8 x 12/24 x 3/4" Oval Head Machine Screws."

Answer to number 3 A and L in Ct.
 
Last edited:
Neil,
GIM horn motor cover is not reproduced as far as I have seen. Snyders and Brattton offer the cover in plain, Sparton and Sparton with Ford script.
I haven't seen a GIM version or an FM, probably because they were a lower production unit.
Doug
 
Neil,

Which size 'GMI' logo do you need ?

A&L Parts Specialties offers both, early 1/4" or later 7/16"

JB
 
You must log in or register to reply here.
Back
Top