39 Mercury running board Rubbers

M

Mark Gee

New member
Hi can anyone recommend the best place to get some new running board rubbers for my 1939 Mercury? Cheers Mark
 
Mark Gee said:
Hi can anyone recommend the best place to get some new running board rubbers for my 1939 Mercury? Cheers Mark
Click to expand...
None being reproduced that I am aware of!!!! Welcome to the world of 39/40 Mercury's!!! IF you find some please let me know I need two sets!!!
 
There was a guy, Hunley Acuff in Rossville Georgia who vulcanized the correct covers on your boards years ago. I don't know if he is still around or not. Try Googleing him. It's worth a shot.
 
Lawson Cox said:
There was a guy, Hunley Acuff in Rossville Georgia who vulcanized the correct covers on your boards years ago. I don't know if he is still around or not. Try Googleing him. It's worth a shot.
Click to expand...

He’s out of business. I know the guy that bought the moulds for the 39 Mercury
 
Thanks for the repliesi can't have my original ones recovered as I'm in the UK so need just the rubbers shipped, will try Metro Moulded products.
 
Mark, here is their email and phone # below.

metrosales@metrommp.com


Please Call the Number below to talk to Jim directly about his covers.
============================================

PS: I just talked to Jim, there, and he gave me his Direct toll free #
to call, as he said he lists having a Perfect reproduction cover
in stock. He is going to pull a cover and measure it, to be able
to compare to what you may need.
call JIM direct at his toll free # : (corrected number) 1-866-643-7826




.

.
 
Last edited:
As the owner of a 39 Merc I'd like to get into this conversation too. Some years ago Mike Kubarth recomended Mr. Acuff because he vulcanized the covers installed. As already mentioned Mr. Acuff is out of business. Ken/Alabama is the person you know who bought the molds at Metro Moulded? My running board covers aren't bad but I'd be interested in some exact repros. Thanks guys.
 
Shoebox said:
As the owner of a 39 Merc I'd like to get into this conversation too. Some years ago Mike Kubarth recomended Mr. Acuff because he vulcanized the covers installed. As already mentioned Mr. Acuff is out of business. Ken/Alabama is the person you know who bought the molds at Metro Moulded? My running board covers aren't bad but I'd be interested in some exact repros. Thanks guys.
Click to expand...

The person I know is not affiliated with Metro . I do know he has the moulds for the 39 Mercury and maybe Lincoln Zephyr. I asked him about the moulds for the 40 Ford but he doesn’t have them.
 
You must log in or register to reply here.
Back
Top