‘38 V8-60 oil pan

[Lisas38]

‘38 V8-60 oil pan

I had a look around the Barn forum and would like an experienced hand’s input. My oil pan’s lower bell has an oblong hole in it under the starter gear. I assume someone had an issue and this was the most expedient solution. Any thoughts about why and whether I should fill it?

 

[petehoovie]

Re: ‘38 V8-60 oil pan

I had a look around the Barn forum and would like an experienced hand’s input. My oil pan’s lower bell has an oblong hole in it under the starter gear. I assume someone had an issue and this was the most expedient solution. Any thoughts about why and whether I should fill it?

 

[TerryOH]

Re: ‘38 V8-60 oil pan

Can not see the oblong hole in question. I do see the round hole on the bottom of the cover for the large cotter pin that keeps the hole open so any oil can drip out.

 

[deuce lover]

Re: ‘38 V8-60 oil pan

Shouldn't be there.I suggest patching it.

 

[Lisas38]

Re: ‘38 V8-60 oil pan

Terry, it is the blue oval between the drip hole and the starter mount. Thanks Deuce, I'll fill it.

 

[40cpe]

Re: ‘38 V8-60 oil pan

It looks like a convenient way to turn the engine with a screwdriver.