38 Ford dash bezel retainers?

[caf]

Reassembling my basket case 38 anyone have photos or a link where to get retainers for the dash bezels ,not clear on how these are held in,thanks ahead

 

[51 MERC-CT]

Just looking at the bezels that seem to have (3) tabs with holes.
I would suspect that the dash has (3) tabs with holes that line up.
Not knowing of any special 'clip', I would use machine screws and nuts or sheet metal screws and spring nuts.

 

[Will D]

Just looking at the bezels that seem to have (3) tabs with holes.
I would suspect that the dash has (3) tabs with holes that line up.
Not knowing of any special 'clip', I would use machine screws and nuts or sheet metal screws and spring nuts.

Yes the 3 tabs line up to 3 tabs on the dash. Mine are secured with machine screws and nuts.

 

[Jacques1960]

Just finished the cigar lighter for my ‘38; PM me if I can be of help on that.

 

[caf]

Yep that works just got back from the hardware store with a couple of bags of machine screws,,and on the bottom will just go with a c clip and a sheet screw,,, thanks much