37 V8 - Thermostat anchor??

[Talkwrench]

If you look close to mine you'll see a zip tie, just chokes the hose, I had [and still do] it like that for some time but use the wire method too.

 

[Tinker]

See this thread > https://www.fordbarn.com/forum/showthread.php?t=118305&highlight=henry+thermostat+place

Pretty low tech good solution.


I believe an Old henry post. he always had a way to get it done. Traveled a lot and did some questionable fixes. This was not one of them.


He is mia now. Flying RV planes now to my knowledge.

 

[29AVEE8]

Delete.

 

[fordwife]

The wire method works well. I have used it for years.

 

[Gary troxel]

That style was only on Carriers.

 

[mit31]

Thanks all, I appreciate the responses!

 

[petehoovie]

You could also try one of these > https://www.jegs.com/i/JEGS/555/53260K1/10002/-1

View All JEGS In-Line Thermostat Housing
JEGS In-Line Thermostat Housing Kit with 180 Degree Thermostat

Part Number: 555-53260K1

$28.97

In-Line Thermostat Housing Kit
Includes:(1) In-Line Thermostat Housing 555-53260
(1) 180 Degree Thermostat 555-53221
(2) Hose Clamps 555-16055

 

[Jack E/NJ]

supereal>>> secure them with a hose clamp placed around the hose just over the stat>>>

Old Henry>>>hold the stat in place is put a hose clamp above it and crank it down>>>

TonyM>>> I think some one on FordBarn suggested using a second clamp to hold the thermostat in place. This is what I did. No more problem.>>>

mit31>>>The only thing I can think of is a hose clamp above the stat>>>


8^) Jack E/NJ