'37 trunk hinge question

[bill3337]

Can someone tell me what was used in these metal cups that go over the trunk hinge bolts inside the car. When I removed them originally, they seemed to be full of something like old plumber's putty. Was that to keep water from leaking into the trunk? What's the proper material to use on these? I'm thinking of using plumbers putty again....... Thanks, Bill Campbell

 

[TJ]

You could use the plumber's putty , but a better choice would be the soft black automotive strip type sealer.

 

[bill3337]

I'm not familiar with that. Do you have a brand? Is it like tape or what?

 

[bill3337]

Ok, I see Napa has something like that, if that's what you mean. I'll try them.

 

[paul2748]

Maybe 3M strip caulk - # 08578

I'm not familiar with that. Do you have a brand? Is it like tape or what?

 

[TJ]

Maybe 3M strip caulk - # 08578

This would be the same stuff I initially recommended. Can be found at some auto parts stores or your local automotive paint dealer. thanks for the part # Paul