37 progress

[Big Shark]

A couple of pics of my progress

 

[bige386]

Its looking good so far. This is the kind of stuff I like doing. Keep up the good work.

 

[Zeke...PA]

Here is how my 37 started, had to repair the frame, had no floor or rocker panels/sills, bottom 6" of body all the way around was gone or had some gobbled up repair with aluminum tape and plastic. When you closed doors the B pillars just flapped in or out a couple inches. When I took doors off and set down the bottoms just curled up. I replaced sills and floors and all the ill fitting patch panels all around. Bought some doors that were supposed to be 39's but turned out to be 40's , had to change the window runners to get rid of the wing windows that I didn't have. Block was cracked. Argh. It is a slow process. Yah havin fun yet ? Zeke

 

[PeteVS]

A couple of pics of my progress

Are you TIG or MIG welding? Looks great!

 

[Seth Swoboda]

Looks good so far. I have always liked the 37's. I'd like to have a 37 tudor or coupe some day.

 

[Big Shark]

I'm tig welding it using a 1/16" tungsten. What do you guys do with the rust behind the panels?

 

[Zeke...PA]

In my case almost all the rusted panels have been replaced or sand blasted behind the patches, I disassembled completely. All my welding is MIG. Zeke