I am putting together a 37 that was started by someone else. I have the right and left splash shields that I read should bolt to frame. I have the heater box on right side, i dont think it will fit because of heater box. and does the driver side go over the steering arm. The steering arm is already on and it looks like a tight fit. Do people leave these off. I tried to find some pics on internet, does anyone have some pics or a link to some
37 ford splash shield
- Thread starter buzz882
- Start date
petehoovie
Well-known member
The drivers side splash pan goes over the steering arm.
And this from the Ford Restoration Book: "when a Hot Air type heater was installed, the right side engine pan was either removed or left off to provide clearance for the heat exchanger. Three3 basic designs of heat exchangers were used through 1937.
And this from the Ford Restoration Book: "when a Hot Air type heater was installed, the right side engine pan was either removed or left off to provide clearance for the heat exchanger. Three3 basic designs of heat exchangers were used through 1937.