truckdog62563
Well-known member
Oh boy, how do I do a short answer? Here goes. There were three wheel companies, and two rim companies. Budd, Kelsey Hayes, and Motor Wheel Corporation produced the wheels using rims sourced from either (or both) Firestone Steel Products Company or Goodyear. Budd and Motor Wheel products will have a five digit number stamped into the wheel somewhere. Generally concave inner face for Budd, or convex outer face for Motor Wheel. Kelsey Hayes have nothing/nada/zip. The K-H variety then have to be identified by measured offset and backspacing. I have a very complete library of old wheel and rim references and can generally look up the numbers and connect them to Ford numbers.
There will be differences in wheel offset and backspacing that naturally interplay with the rim widths when trying to build a set that are an exact or near match. I can on most look up the numbers that you find and give the comparative specs. I have found some wheels where the numbers are clearly stamped but are nowhere catalogued, but it’s rare. So let me know what you find. Stu
There will be differences in wheel offset and backspacing that naturally interplay with the rim widths when trying to build a set that are an exact or near match. I can on most look up the numbers that you find and give the comparative specs. I have found some wheels where the numbers are clearly stamped but are nowhere catalogued, but it’s rare. So let me know what you find. Stu
