'37 Dash Chrome Trim Pieces ?

'37 Deluxe dash with glove box clock....

314233
 

Attachments

  • '37 Deluxe Dash with Glovebox Clock 002.JPG
    '37 Deluxe Dash with Glovebox Clock 002.JPG
    100.3 KB · Views: 64
Hello, here are some pics of the trim pieces from Don.
Larry
 

Attachments

  • 20170429_145515.jpg
    20170429_145515.jpg
    47.6 KB · Views: 49
  • 20170429_145456.jpg
    20170429_145456.jpg
    55.2 KB · Views: 46
  • 20170429_145435.jpg
    20170429_145435.jpg
    42.4 KB · Views: 41
  • 20170429_145404.jpg
    20170429_145404.jpg
    41.5 KB · Views: 33
Thank you for the photos gents!! Larry, the pieces from Don look great. I'm looking forward to getting some from him. Your dash looks really good, did you have it re grained?
 
If there is enough interest, I would consider making another run. I made them for Roy back in the day. Send me an email at v8fordman@hotmail.com. Let me know which you need for the glove box. I'll keep a list. Jay
 
I have had a number of requests for trim pieces, so if you are interested, drop me a email and be specific if you have a clock or not and whether or not you need a complete set. I have some extras, but not a full set.
Don
aandtman@hotmail.com
 
Oldguysrule said:
Thank you for the photos gents!! Larry, the pieces from Don look great. I'm looking forward to getting some from him. Your dash looks really good, did you have it re grained?
Click to expand...

Hello, I bought that particular dash already grained. But for my other convertible I will be sending my dash to ford barn member "Felix37". His name is Jonathon. He already did a dash for my 37 slant back. He has original templates to match what ford was using back then. I'll post some pictures of his work.
Larry
 
Looking forward to the photos that you have of Jonathon's wood graining. I need a glove box door grained to match the rest of my dash.
 
Getting ready to wood grain my 37 deluxe. The only way I could remove the vertical trim was to grind off the "staked" tab on the back side. Any thoughts what type of adhesive to use to reattach them? Thanks for your time!
 
marshall k said:
Getting ready to wood grain my 37 deluxe. The only way I could remove the vertical trim was to grind off the "staked" tab on the back side. Any thoughts what type of adhesive to use to reattach them? Thanks for your time!
Click to expand...
Try E-6000 adhesive. It's clear and you can apply a small amount with a toothpick. Can be found at most automotive stores or hardware stores.
 
You must log in or register to reply here.
Back
Top