36 Fordoor Glass Replacement

[PeterinNH]

I need to replace the driver door glass in 36 Humpback Sedan. Can anyone give
me some info on how to best remove the existing glass in the door? What I need
to know is how to get the glass out once I've disconnected the regulator from
the bottom channel as.

Any info will be greatly appreciated.

 

[corvette8n]

https://youtu.be/_Vk7U5rWx6A?si=xMVL9jnJR8e4uOLR
Found this hope it helps.

 

[50droptop]

32Bee - I wrote this post a few years back. Could be helpful to your situation. This was written to document the window install, but could be useful for removal as well.

https://www.fordbarn.com/forum/showthread.php?t=267348

 

[PeterinNH]

Thanks to the both of you. It looks to me like it should be fairly non problematic especially
considering I've had some recent practice on another early Ford I own which doesn't have
sliding front windows.
Peter

 

[JayChicago]

With the fore-aft sliding windows, where the bottom glass channel is mounted to the new piece of glass is critical. Only about 1/4”-1/2” fore-aft adjustment at the regulator. Before removing the bottom glass channel from broken glass, carefully note distance from front /rear edge of old glass.