36 ford heater

jacob smith

jacob smith

Senior Member
Anyone have a good photo of a 36 ford heater. I need to compare to some of the parts that a have to see if they are right and to help me to look for the missing parts.
Thanks Jacob
 
This is my '35's heater. Gotta be close.
 

Attachments

  • image.jpg
    image.jpg
    53.9 KB · Views: 79
jacob smith said:
Anyone have a good photo of a 36 ford heater. I need to compare to some of the parts that a have to see if they are right and to help me to look for the missing parts.
Thanks Jacob
Click to expand...

I'm guessing the heater could be about anything. Dealer could have installed about anything as well as someone installing/replacing one after purchase. As suggested a photo of what you have would be a good starting point.
 
JSeery said:
I'm guessing the heater could be about anything. Dealer could have installed about anything as well as someone installing/replacing one after purchase. As suggested a photo of what you have would be a good starting point.
Click to expand...

That ^ and one thing's for sure, if it's a water heater, it's not stock.
 
The only authentic 36 Ford heater was a hot air heater using exhaust heat. There was no authentic hot water heater offered by Ford in 35. Is that what you have in parts?
 
Jacob, Here are 2 pictures. One is a 35 and early 36 assembly and the other is middle to late 36. Hope it helps.
 

Attachments

  • ACES3633.jpg
    ACES3633.jpg
    28 KB · Views: 60
  • 36manifoldheater.jpg
    36manifoldheater.jpg
    75.7 KB · Views: 81
Wow, the stock set-up looks like a good way to asphyxiate yourself if not perfect inside the heat transfer tube. Obvious why Mfgr's went to the hot water type. Wonder if there were any fatalities?
 
Don
Thank you that is what I was looking for. It looks like I got some of the parts. Do you know if there was any piping to the windshield and what it looks like in the 35 to 36 heater. It looks like there is piping for the windshield in the the late 36 set up. Also is there a floor heater for the back seat.
 
Last edited:
I so what looked to be a fairly complete 35-early 36 heater like Don's first picture at the Monroe WA swapmeet yesterday and it had the driver side defroster
 
Jacob, Here are some photos of the defroster kit for your 36 Ford. It mainly consists of the elbow with outlet, flexable hose, defroster valve and defroster. Hope this helps.

Don
 

Attachments

  • 36heaterAcc01.jpg
    36heaterAcc01.jpg
    127.3 KB · Views: 36
  • 36heaterAcc05.jpg
    36heaterAcc05.jpg
    95.4 KB · Views: 27
  • 36heaterAcc07.jpg
    36heaterAcc07.jpg
    64 KB · Views: 41
Jacob, In regards to your question about a rear seat heater, it did exist. There was an adapter at the heat exchanger outlet that connected to a flexible conduit that went to the rear heater outlet and adapter.
 

Attachments

  • Detail.jpg
    Detail.jpg
    148.4 KB · Views: 24
  • rear register.jpg
    rear register.jpg
    141 KB · Views: 33
You must log in or register to reply here.
Back
Top