alanwoodieman
Well-known member
customer brought in a 54 Victoria with a 351 Cleveland, needs a water pump, when I have looked for one-I get stares from counter person---question how can I ID the pump and what model of car engine was in
351 cleveland engine
- Thread starter alanwoodieman
- Start date
Alaska Jim
Well-known member
probably one from an early '70s mustang with the 351 Cleveland eng. would work. you probably need to find a parts store with a real parts person, although they are getting harder to find all the time.
dmsfrr
Well-known member
If numbers on the water pump don't help you, you can look for the casting number on the engine block.
The info at this link says it's just above the starter. The first two characters of the number should tell you the year of the block. Hopefully that helps you out.
"D" = 70's decade... D1 = 1971, D2 = 1972, D3 = 1973 and so on...
https://www.diyford.com/ford-351-cleveland-engines-block-identification-guide/
.
The info at this link says it's just above the starter. The first two characters of the number should tell you the year of the block. Hopefully that helps you out.
"D" = 70's decade... D1 = 1971, D2 = 1972, D3 = 1973 and so on...
https://www.diyford.com/ford-351-cleveland-engines-block-identification-guide/
.
Last edited:
KULTULZ
Well-known member
Are you asking by the car model (1954) or engine series (351C 1970-74)?
JeffB2
Well-known member
Should be this one at your local Autozone part # CWP-399 $39.99
Attachments
Ford blue blood
Well-known member
Yup, have that when I go in for parts for my 351C. Engine? 2bbl? Automatic? PS? Air? Car? Answer 1936 Chevrolet.......easier to just say 72 Ranchero.
alanwoodieman
Well-known member
thanks for the info, all that responded. kuklutlz engine info
39deluxecp
Senior Member
All the same pump
JeffB2
Well-known member
Attachments
... kuklutlz ...