Here is how I did my tudor sedan door windows.
Remove the handles
Remove the garnish moulding
Remove the door uph panel
Unhook the window regulator arms from the glass channel.You might have to wind the window all the way down
Now here is where its gets tricky as you need to pull the window up and tilt it inwards to get it out.
The tricky part are the side fuzzy glass channels,especially the front which is deeper.
The front one is hooked top and bottom to the tin channel receiver.look inside on the bottom of it if you can and unhook it -then pull it out from the top.
Removing those channels enable you to get the window out without struggling.