NEED TO KNOW LENGTH & WIDTH OF BOARD BEHIND SEAT BACKREST ON 5WND & DOES IT ATTACH TO PACKAGE TRAY OR TO THE BODY OR BOTH & HOW & I BELIEVE IT IS SUPPOSE TO HAVE A FEW LARGE HOLES IN IT WHAT SIZE ? & DOES IT HAVE AN ARCH LIKE SEAT BACK OR NOT ?---ANY HELP WOULD BE APPRECIATED--- I Have the orig pkg tray
35 5wnd package tray board ?
- Thread starter dave m
- Start date
My seat is out of my 35 coupe so I will help where I can. The board is 52” long, but that is to the upholstery panel. I would guess the board is 2” longer. It has a slight arc to it. The width at the end is 7 ½” and at the center 8”. So it curves up from 7 ½” to 8”. It is ¾” thick. There are 7 holes and are 4 ½” diameter. The package tray is attached to the bottom of the board with several wood screws.
Attachments
rich b
Well-known member
Here are a couple of pictures of a loose board.
I noticed it was beveled on the edge that screws
to package shelf. Sorry about the tape being
upside down; but I can not work the camera with
my left hand. Let me know if you want any other measurements
Too bad you are not in St. Paul, you could have
the board.
Rich
I noticed it was beveled on the edge that screws
to package shelf. Sorry about the tape being
upside down; but I can not work the camera with
my left hand. Let me know if you want any other measurements
Too bad you are not in St. Paul, you could have
the board.
Rich
