34 radio installation and operating manual

[TerryOH]

I see there is a reproduction of a 34 radio installation manual. The reproduction instructions I have seen say "All In One" Is this for the glove box radio or the ash tray? I am looking for exact location for drilling the mounting holes for the ash tray radio. My firewall does not have dimples for location. The 35 radio installation manual does have the proper location and dimensions. I am wondering if the 34 radio reprint would also have them? They are not in the Ford service Bulletins.
In addition some of the reproduction manuals are without year designation and some have the year printed on the cover? Is that just for the sellers information?

 

[DavidG]

Despite the "all in one" label, I believe that those manuals in your two photos are for the ash tray type radio with the remote tuning head given the manufacturer, Philco. There were two suppliers of glove box radios and they were Grigsby-Grunow and Zenith.

 

[TerryOH]

Thank you David

 

[DavidG]

You're welcome!

 

[Karl]

I see there is a reproduction of a 34 radio installation manual. The reproduction instructions I have seen say "All In One" Is this for the glove box radio or the ash tray? I am looking for exact location for drilling the mounting holes for the ash tray radio. My firewall does not have dimples for location. The 35 radio installation manual does have the proper location and dimensions. I am wondering if the 34 radio reprint would also have them? They are not in the Ford service Bulletins.
In addition some of the reproduction manuals are without year designation and some have the year printed on the cover? Is that just for the sellers information?

Terry search on here There is a post with the exact measurements for the hole locations -Karl

 

[TerryOH]

After searching for a while I found Petes posting.
https://www.fordbarn.com/forum/showthread.php?t=266395&highlight=34+radio+installation


Thank everyone .

 

[dean333]

Does anyone have a close-up picture of the radio?

 

[TerryOH]

dean333 Do you have a question regarding the ash tray radio?

 

[petehoovie]

dean333 Do you have a question regarding the ash tray radio?