'34 drag link

[NDFlathead]

What is the procedure for adjusting the end, large screws, on a 1934 Ford drag link?
Appreciate any help on this matter.

NDFlathead

 

[David J]

IF your ball studs are perfectly round tighten the screws until you coil bind the spring & then back it out 2-3 turns . This will prevent "DEATH WOBBLE" . If your ball studs are worn some you will need to set this at the tightest point . Usually opposite of it's working position . If you don't do this it will bind when you turn due to the ball being thicker where it isn't worn . Real simple stuff & search "DEATH WOBBLE" . You will see the wobble thing is commom & CUREABLE !!!

What is the procedure for adjusting the end, large screws, on a 1934 Ford drag link?
Appreciate any help on this matter.

NDFlathead

 

[NDFlathead]

THANKS for your help David.