33-34 Sedan top extrusion

[rockfla]

Any barner's done a 33/34 sedan roof insert replacement recently. I need the insert extrusion strip source?? ALSO the wood bows too!!! PM me OR email at salesjbnase@comcast.net

 

[Krylon32]

Try Cubel Ford Wood in Utah for your top bows.

 

[rockfla]

Try Cubel Ford Wood in Utah for your top bows.

Thank you Sir!!!

 

[petehoovie]

Try Cubel Ford Wood in Utah for your top bows.

Cubel Ford Wood > https://fordwood.com/

[URL="https://fordwood.com/links.htm"]The Cubels[/URL]
Henry and Anna
2nd Generation Family Owned and Operated
Phone: 435-749-0037
Fax: 435-687-9239
P.O. Box 1401
Huntington, Utah 84528
cubel_fordwood@yahoo.com

 

[Newc]

the metal, rounded nail strip was made in aluminum at one time. To bend it use a wood open pattern and lightly head it. Smokey acetylene flame will do. Newc

 

[Karl Wescott]

The manufacturer has switched from aluminum to unobtainum.

 

[rockfla]

The manufacturer has switched from aluminum to unobtainum.

Any one have a piece I could get measurements off of and a radius from and I will Mill my own!!!

 

[T Scott]

I would think milling would be difficult at best. I believe the original steel molding was roller formed and the aluminum aftermarket molding was either formed or extruded.
Contact Mikes "A" Fordable parts. Their roof molding A473016 is a close look alike to the 34 molding but I think about 1/16" narrower. The 34 was 13/16" (+/-) The rubber insert is also available.

 

[the.secret.victoria]

I'm in the same boat, unfortunately - in need of either OEM or aftermarket pieces.