33-34 Floor Pans

$

$um Fun

Senior Member
Is there a reliable source that makes and stocks correct replacement floor panels for 33-34? I know the usual suspects, but looking for a reliable source.
 
No clue on where to get this .

That said the rear section [ with the diff hole ] is very different 33 to 34 .
Not exactly sure when the change happened but it seems to be close to a 33-v-34 change .

The 33 type has stiffening braces spot welded underneath .
The 34 type does not have these as the stamped in ribs were made sharper and deeper .

If needed I can take pics of both types in the spare floor pile .
 
When you say reliable, do you mean reliable about quality or reliable about delivery?

Howell's lists a facsimile of a floor pan on flea-pay. If it is actually in stock and ready to go then that may be as close as you will get. Bradley may still be taking care of his parent or whichever family member is in bad shape or whatever other excuse he may have. His quality was best but his reliability about delivery is poop.

Steve's Auto Restoration is about the only other one that ever came close to 33 & 34 stuff.

It's a good chance the answer is that there is no reliable source.
 
Here's a photo of the underside of the '33 version.
 

Attachments

  • 33 floor-sill details-8.jpg
    33 floor-sill details-8.jpg
    29.9 KB · Views: 620
Thanks everyone for the info. I need the center section of the floor with the hump and don't want to deal with Bradley or Smart. Someone must be making these parts, or if anyone has a original floor contact me
 
415725

Here is a picture of a USA 1934 Ford floor that was imported into Australia a few years back. It was used to replace the mostly wooden floor in an Australian 1934 Ford Roadster. This gives you what a bare floor looks like.
 
Just a side question,
Om my 33 there is a funny looking reinforcement u shaped part up the front of the t/tube area of the floor plane ,its factory fitted,but I never worked out what its for,
Lawrie
 
Lawrie: Not sure what reinforcement you reference, is it shown above in post #7 ?
 

Attachments

  • 1934 rear floor pan.jpg
    1934 rear floor pan.jpg
    69.6 KB · Views: 184
Last edited:
rotorwrench said:
When you say reliable, do you mean reliable about quality or reliable about delivery?

Bradley may still be taking care of his parent or whichever family member is in bad shape or whatever other excuse he may have. His quality was best but his reliability about delivery is poop.
Click to expand...

I have been calling every week and his phone still goes to VM and the box is full. I wonder about the other employees working for him. He had about 4. Are those guys laid off?? Anybody live close that can physically check things out??
 
You can make a floor, it depends on your skill level ,or determination ,I made a couple of mistakes on this one ,the Govt here ran a night school class with all the old timer body men in the 90s ,the classed turned out all sorts ,model Ts ,people took there projects there ,,
 

Attachments

  • USA in NZ 020.jpg
    USA in NZ 020.jpg
    50.5 KB · Views: 87
Here's another shot ,I have belter ones but have in 100s of photos they take some finding ,the rusty section was hand made at night school ,I can elaborate if there's any interest ,I am conscious of posting to many posts,
 

Attachments

  • USA in NZ 024.jpg
    USA in NZ 024.jpg
    69.4 KB · Views: 84
too many posts? i wasnt aware that was a problem here. while some may want to shut me off, i dont think you have to worry ted !
 
Tom Bay is evidently not an internet person. This is from the HAMB.
R&J Enterprises
6034 302nd RD
Arkansas City, KS 67005

phone 620-441-0032
fax 620-307-6086
tbay@cox.net

It's good to know that someone else is doing it. I'm sure having the guy in McPherson helps some too.
 
Last edited:
These are a couple of years old.
 

Attachments

  • img20191215_09384872.jpg
    img20191215_09384872.jpg
    42.7 KB · Views: 73
  • img20191215_09374462.jpg
    img20191215_09374462.jpg
    34.6 KB · Views: 45
I recommended Tom Bay for some 32 patch panels and apparently they were not very nice according to Ronnie Roadster?? I've had a couple customers use his 33/34 floor pans and they thought they were good. I suppose it depends on your expectations?
 
You must log in or register to reply here.
Back
Top