jerseyboy
Well-known member
- City
- Barkhamsted
- State
- CT
- Price
- $20.000
I am asking $20,000 for a 1932 wagon and will entertain offers.
• The wagon is currently unassembled. All the sheet metal is included and in very good shape. Some parts have been repaired by Pat Pryor and BCCHOPIT. Two metal guys on the Barn and HAMB.
• The price includes many spare '32parts, banger engine, ****** parts, radiator, rims, brake parts, etc.
• 90% of the wood is there, the roof has been rebuilt by the Kline brothers in York, PA. as well as the windshield header and door posts. The rear posts are replacements that came with the car, but are not correct in type of wood and details. All of the metal brackets for the wood body are included.
• The two jump seats are missing as well as the window side curtains and curtain tracks.
• I have all of the door hardware and sill plates, tailgate hardware (except chain and cover), roof drip rails, windshield frame, floor hardware; front and back, and wiper motor. I do not have the tool tray.
• The front cross member is bolted-in( needs to be riveted). The chassis itself has no rust but some wrinkles up by the horns from an old accident. Front and rear springs are good and a new lowered front spring is included. The wagon comes with mechanical brakes which were in the process of being rebuilt.
• The sheet metal includes, rear wheel well pan, firewall, cowl, header panel, radiator cowl (still has some rust out on the bottom of one side), all four fenders (in very good shape), front seat brackets, floor board brackets, running boards, splash panel, and engine splash pans.
• 95% of the original fasteners are included, plus repro fasteners from Roy Nacewicz and Custom Classics & Rods.
• The engine is a four banger and is in good shape. Last time it was run, it was blowing some smoke. Needs new rings on #4 cylinder. Includes rebuilt water pump, rebuilt distributor, three fuel pumps that need rebuilding, original starter plus spare, original generator (needs to be reassembled), 1 Holly carb (unassembled), 2 Carbs (one unassembled, one not rebuilt).
• The wiring harness is new from Tyree Harris and the head and taillights are all original. The dash comes with all the original instruments and dash light.
• The wagon comes with copies of the owners manual, 32 parts book, and 32 repair manual as well as copies of other 32 related books and research material. Depending on what state you are in, 32 plates maybe included.
First picture is of the wagon when first purchased in '67. Next picture is just before disassembly in '06.
I will post more pictures if needed. Email: scott@evodesign.com
• The wagon is currently unassembled. All the sheet metal is included and in very good shape. Some parts have been repaired by Pat Pryor and BCCHOPIT. Two metal guys on the Barn and HAMB.
• The price includes many spare '32parts, banger engine, ****** parts, radiator, rims, brake parts, etc.
• 90% of the wood is there, the roof has been rebuilt by the Kline brothers in York, PA. as well as the windshield header and door posts. The rear posts are replacements that came with the car, but are not correct in type of wood and details. All of the metal brackets for the wood body are included.
• The two jump seats are missing as well as the window side curtains and curtain tracks.
• I have all of the door hardware and sill plates, tailgate hardware (except chain and cover), roof drip rails, windshield frame, floor hardware; front and back, and wiper motor. I do not have the tool tray.
• The front cross member is bolted-in( needs to be riveted). The chassis itself has no rust but some wrinkles up by the horns from an old accident. Front and rear springs are good and a new lowered front spring is included. The wagon comes with mechanical brakes which were in the process of being rebuilt.
• The sheet metal includes, rear wheel well pan, firewall, cowl, header panel, radiator cowl (still has some rust out on the bottom of one side), all four fenders (in very good shape), front seat brackets, floor board brackets, running boards, splash panel, and engine splash pans.
• 95% of the original fasteners are included, plus repro fasteners from Roy Nacewicz and Custom Classics & Rods.
• The engine is a four banger and is in good shape. Last time it was run, it was blowing some smoke. Needs new rings on #4 cylinder. Includes rebuilt water pump, rebuilt distributor, three fuel pumps that need rebuilding, original starter plus spare, original generator (needs to be reassembled), 1 Holly carb (unassembled), 2 Carbs (one unassembled, one not rebuilt).
• The wiring harness is new from Tyree Harris and the head and taillights are all original. The dash comes with all the original instruments and dash light.
• The wagon comes with copies of the owners manual, 32 parts book, and 32 repair manual as well as copies of other 32 related books and research material. Depending on what state you are in, 32 plates maybe included.
First picture is of the wagon when first purchased in '67. Next picture is just before disassembly in '06.
I will post more pictures if needed. Email: scott@evodesign.com
Attachments
Last edited: