32 sun visor brackets

Terry ,if its the flat ones (like these in pic)used into 33 & 34 std you could probably make them.
 

Attachments

  • s-l1600.jpg
    s-l1600.jpg
    62.3 KB · Views: 44
  • 33 sedan.Front headliner area w:visors.jpg
    33 sedan.Front headliner area w:visors.jpg
    45.5 KB · Views: 35
Last edited:
If they are literally for the ends, as opposed to near the ends, then they would be the die cast brackets used only on early and mid-year '32 deluxe coupes as shown below. I do not recall those brackets being reproduced.
 

Attachments

  • B-520 restoration 006 (2).JPG
    B-520 restoration 006 (2).JPG
    60 KB · Views: 33
  • olympus photos June, 2013 089.jpg
    olympus photos June, 2013 089.jpg
    77.1 KB · Views: 33
Good to know that they are available.
.
The '33 and standard '34 two-piece flat brackets and visors were carried over from late '32 production, including on late deluxe coupes.
 

Attachments

  • $(KGrHqR,!joE4stP-7JEBOTvmMYEew~~48_12.JPG
    $(KGrHqR,!joE4stP-7JEBOTvmMYEew~~48_12.JPG
    36.3 KB · Views: 155
Last edited:
505247


A friend of mine sent me this picture of his broken Sun Visor in his Imported 1932 Ford Five Window Coupe and asked me if I had any in my parts?
 
505246


505245


1932 Ford Closed Car Sun Visor. After looking through my parts, I found this lone Sun Visor. I didn't have a clue as to what it was off, but while it is not perfect, it is now fitted to his Coupe. How come it is totally differently to the Sun Visors shown above in this Thread?
 
David has shown the brackets I inquired about in his post #3. Notice the three screw mounting on each end brachet and notice the number of screw holes holes in the brackets in post #5. Maybe one of the holes is hidden in that photo???
 
The difference is that those in #5 have the screws that clamp the visor in place, whereas those screws are absent in the photo in #3.
 
You must log in or register to reply here.
Back
Top