32 frame parts

J

jackson32

Member
I have all the parts to put a 32 frame together with American stamping rails or original rails that need restored I have very good k member front and rear cross members clutch and brake pedal good wish bones 4 in dropped a Magnum axel with new spring spindles flat head brakes 32 v8 rear , spring a 78 trans case and parts to attach to k member what kind of value can be put on this I have it apart now am going to put back together when it warms up I am not interested in parting it out was going to build a Brookville Roadster out of it I sold my 59 AB so I am thinking of selling it
 
$800 for the ASC rails, $150 for the frt xmber, $500 for the Kmember, $150 for the rear xmember. $400 for good uncut frt bones $300 for pedal set. $400 for early 32 rear complete, $100 for the rear spring $75 for empty 78 case $250 for magnum axle.........
I would say 3k--$3.5K is about right give or take a few $$
 
In very late 32 a change was made over to the "33-34" style rear. The torque tube and drive shaft were shorter than the 33-34 units. Rear springs were the same for all styles . Check the length on yours. The later style is more robust than the earlier style but you are limited (costwise) as to ratios. Early 32 rears were essentially a Model A with different spring hangers.
 
I have had these parts for a long time and I still have the original 1932 rear with model a drive shaft in it as it came out of a z'd frame and I know the difference I looked at 34 rear gears and they are high I have a 1940 rear may go that way . Thanks Jack
 
You must log in or register to reply here.
Back
Top