32-39 Steering shaft tube

[Init1]

City

Oregon City

State

OR

Looking for a 32 to 39 steering shaft tube (mast) with a bell on the top.
Needs to be rust free and no dents.

Don't need the shaft or any other steering parts.

 

[oldandtired]

Do you know which length you need? It would also help to know if it is for a passenger car or for a commercial vehicle; the holes for the lock mechanism are not in the same locations.
scardilla77034@yahoo.com

 

[NealinCA]

32 isn't belled at the top either...

 

[Andy]

I have always used 1.5 exhaust tubing or electrical conduit. A small bell for a 39 wheel can be added at the muffler shop.

 

[flatheadfan]

INIT1- I agree with Andy. I have always used 1.5" exhaust pipe. It takes a minor amount of work to have it fit right but the end result is a product superior to Henry's for about $10. PM me if you want directions and pictures.

Tom

 

[Init1]

Great idea. My steering is 1950 F-1. Pics would be great.

 

[Init1]

Hello Oldandtired. Me Too! See the threads. Great idea to make my own and I will do that. Thanks for your response.

 

[Init1]

hello Nealinca... thanks for the response. Wasn't sure if 32 had a bell or not, but from the threads I will make one.

 

[sangar29]

I have a few, 2 have the ign sw still in place. gary