32/34 and 35/37 Brake operating pins

Dirtruck

Dirtruck

Member
City
Titusville
State
Fla
I'm looking for mechanical brake operating pins that go down thru the center of the king pin which accuate the shoes.
 
I believe that some overhead valve pushrods can be used. Sorry I do not know which make or year but a good parts man should be able to give you the measurements. Also, you may look in past V8 times for this information.
Good luck.
Paul
 
I have two pins 48-2076 and 48-2077 they are 6 and 1/4 inches long and .555 diameter with new bushings they are nos. I also have a lot of mech. Brake parts that are nos. if this is of any interest to you I can send pictures to your e-mail address. E.mail galenlee@mail.com or call 320-286-2036
 
Galen Lee said:
I have two pins 48-2076 and 48-2077 they are 6 and 1/4 inches long and .555 diameter with new bushings they are nos. I also have a lot of mech. Brake parts that are nos. if this is of any interest to you I can send pictures to your e-mail address. E.mail galenlee@mail.com or call 320-286-2036
Click to expand...
Thanks for reply...32/34 pins are 7 11/16"long and resemble an engine pushrod 35/37 pins are 7 1/2 " long and one end is pushrod shape the other is bell shape .Again Thanks Dick(Dirtruck)
 
You must log in or register to reply here.
Back
Top