31 roadster top boot installation

sphooch

sphooch

Senior Member
Hi guys , I still have questions about this. with the top folded down and the boot in place ,does it secure to the package tray with snaps?? my tray has oval head screws with finish washers , do they need to be replaced?? Thanks again for the help. THE HOOCH
 
Hooch mine has 4 snaps on the back wall of the package tray to snap the boot in place. They work fine.
 
My '31 boot has no snaps on the package tray. The boot is held by snaps on the boot itself on both sides and the leather straps that go through the footman loops on the header. The top is up and the car still has the Christmas lights from Saturdays parade. I can get you a photo of the boot off the car now or when I get the decorations off I can get a photo with the boot installed. PM me. Russ
 
russcochiolo said:
My '31 boot has no snaps on the package tray. The boot is held by snaps on the boot itself on both sides and the leather straps that go through the footman loops on the header. The top is up and the car still has the Christmas lights from Saturdays parade. I can get you a photo of the boot off the car now or when I get the decorations off I can get a photo with the boot installed. PM me. Russ
Click to expand...
Hi Russ, a pic. or two would be nice. However my boot was made by myself and it sounds like yours,but what I experienced was when I would drive the wind catches the boot and blows it open. hence I cut a slot in it and that slot attaches to the tab on the package tray which I believe is not correct but it does work nice. reading about it ,it looks as though snaps are installed for this reason. I might add that VOL 6 OF how to restore your model A shows no mention for snaps in the roadster package tray. thank you THE HOOCH
 
You must log in or register to reply here.
Back
Top