'31 roadster pickup vacuum windshield wiper question

JaxFLG8r

Member
I've always heard the wiper on the open pickup is different. We have one that was acquired over the years that is supposed to be the "right one", but the retained clips we acquired from a reputable vendor for an open car, do not appear to work.

Question: Is the roadster pickup vacuum wiper different from other open cars?

Does anyone have a photo of the open pickup wiper/mounting clips?

I will take a picture of what we have when I get back to the garage later today. Thank you in advance. Ed Williamson
 
The Ford parts book shows the clamps for the 76-B the same as the Roadster
and Phaeton, A-17589-A.
The wiper motor on the left is the one for some of the 76-B's, it mounts upside
down compared to the other open cars.

Bob
 

Attachments

  • DCP_1055.jpg
    DCP_1055.jpg
    34.6 KB · Views: 62
Last edited:
I think the picture is correct for my '31. They look like the ones used on '32 standard roadsters and phaetons but I am sure a concourse judge could find a difference.

Charlie Stephens
 

Attachments

  • IMG_7292.jpg
    IMG_7292.jpg
    44.3 KB · Views: 72
Last edited:
This is the wiper motor I have, with the open car clips. Ed Williamson
 

Attachments

  • 71F13860-455E-4DEB-B715-455EA5B2B7D8.jpg
    71F13860-455E-4DEB-B715-455EA5B2B7D8.jpg
    84 KB · Views: 51
  • E987213F-2FB6-42F5-BEC1-2CD2BD835F8A.jpg
    E987213F-2FB6-42F5-BEC1-2CD2BD835F8A.jpg
    88.4 KB · Views: 45
Thank you all. My issue was the clips were not meeting up flush with the mounting tabs. The angle attachment was causing the clips to be at an angle. I took the dremel out and notched a little area out, and it is now flush. If I later determine the clips are wrong and i find the correct (original) ones, I can change them out very easily. Thanks again. Ed Williamson
 
Back
Top